Meter exclude network-init sip – Cisco OL-15491-01 User Manual
Page 190
A-190
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
meter exclude network-init sip
meter exclude network-init sip
To exclude incoming Session Initiation Protocol (SIP) transactions (that is, those that are initiated from
the network) from the CSG2 usage calculation, use the meter exclude network-init sip command in
CSG2 service configuration mode. To return to the default behavior, use the no form of the command.
meter exclude network-init sip
no meter exclude network-init sip
Syntax Description
This command has no arguments or keywords.
Defaults
The default behavior is to include incoming SIP transactions in the usage calculation.
Command Modes
CSG2 service configuration
Command History
Examples
The following example shows how to exclude incoming SIP transactions from the usage calculation for
the SERVICE-A service:
ip csg service SERVICE-A
meter exclude network-init sip
Related Commands
Release
Modification
12.4(15)MD
This command was introduced.
Command
Description
Configures a CSG2 content billing service, and enters CSG2 service
configuration mode.
Excludes call control packets for a Session Initiation Protocol (SIP)
session from the CSG2 usage calculation.
Excludes bytes for a WAP 1.x Multimedia Messaging Service (MMS)
session from the CSG2 usage calculation.
Excludes the Real Time Streaming Protocol (RTSP) PAUSE time from
the CSG2 usage calculation.
Excludes the final service idle from the CSG2 usage calculation.
Specifies which Internet Message Access Protocol (IMAP) bytes are
billed for by the CSG2 when doing prepaid debits.
Specifies the increments for debiting quota by the CSG2 upon
completion of a service configured for Service Duration Billing.