Cisco OL-15491-01 User Manual
Page 24

A-24
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
client-group (CSG2 content)
access-list 99 deny 1.1.1.1
access-list 99 permit any
You can use next-hop with client groups as long as a given client group is always sent to the same next
hop. You cannot send a given client group to two or more different next hops based on a content.
The CSG2 searches contents with the same IP and VLAN configuration, but different client groups, in
numerical order. For example, given two contents with the same IP/VLAN configuration, one
referencing client group 4 and the other client group 7, the CSG2 matches the content that references
client group 4.
Examples
The following example shows how to reference client group 44 for the CSG2 content MOVIES:
ip csg content MOVIES
client-group 44
Related Commands
Command
Description
Configures content for CSG2 services, and enters CSG2 content configuration
mode.
Defines a next-hop IP address.