Ip csg ipc keepalive – Cisco OL-15491-01 User Manual
Page 77
A-77
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg ipc keepalive
ip csg ipc keepalive
To define the Interprocessor Communication (IPC) module keepalive time interval for the CSG2, use the
ip csg ipc keepalive command in global configuration mode. To reset the IPC keepalive timer to the
default value, use the no form of this command.
ip csg ipc keepalive number-of-seconds
no ip csg ipc keepalive
Syntax Description
Defaults
The default value is 8 seconds.
Command Modes
Global configuration
Command History
Usage Guidelines
We recommend that you change the keepalive time interval only when directed to do so by
Cisco Technical Assistance Center (TAC) engineers. In most environments, the default value is the most
appropriate setting.
Examples
The following example shows how to specify an IPC keepalive time of 300 seconds:
ip csg ipc keepalive 300
Related Commands
number-of-seconds
Time, in seconds, between IPC keepalives. The range is 1 to 65535. The
default value is 8.
Release
Modification
12.4(11)MD
This command was introduced.
Command
Description
Defines the Billing Mediation Agent (BMA) keepalive time interval
for the CSG2.
Defines the Cisco Persistent Storage Device (PSD) keepalive time
interval for the CSG2.
Defines the quota-server keepalive time interval for the CSG2.