Cisco OL-15491-01 - Manual (Page 211)

A-211
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
owner
owner
To specify an identifier or name for a CSG2 service owner, use the owner command in CSG2 service
configuration mode. To remove the owner ID or name, use the no form of this command.
owner {id id | name name}
no owner {id | name}
Syntax Description
Defaults None
Command Modes CSG2 service configuration
Command History
Usage Guidelines Use this command with fixed-record format to identify a service owner.
Examples The following example specifies an owner ID for the CSG2 service A1:
ip csg service A1
owner id ABC123456
Related Commands
id id 1- to 15-character string that identifies a service owner.
name name 1- to 38-character string that specifies the name of the service.
Release Modification
12.4(11)MD This command was migrated from CSG1.
Changes from CSG1: This command incorporated the following CSG1 commands:
• owner id
• owner name
Command Description
class Specifies a service class value.
ip csg service Configures a CSG2 content billing service, and enters CSG2 service
configuration mode.
ip csg transport-type assign Classifies data traffic on the basis of its access path.
mode Specifies the mode for a CSG2 billing plan.
ip csg records format Specifies variable or fixed CDR format.