Ip csg psd margin – Cisco OL-15491-01 User Manual
Page 96

A-96
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg psd margin
ip csg psd margin
To specify the maximum number of general packet radio service (GPRS) tunneling protocol prime
(GTP’) messages, beyond the size of the Billing Mediation Agent (BMA) message queue, that the CSG2
can buffer for the Cisco Persistent Storage Device (PSD), use the ip csg psd margin command in global
configuration mode. To restore the default setting, use the no form of this command.
ip csg psd margin number
no ip csg psd margin
Syntax Description
Defaults
The CSG2 buffers up to 2000 GTP’ messages, beyond the size of the BMA message queue.
Command Modes
Global configuration
Command History
Usage Guidelines
We recommend that you change the number of GTP’ messages that can be buffered only when directed
to do so by Cisco Technical Assistance Center (TAC) engineers. In most environments, the default value
is the most appropriate setting.
Examples
The following example shows how to configure the CSG2 to buffer up to 3000 GTP’ messages, beyond
the size of the BMA message queue:
ip csg psd margin 2000
Related Commands
number
Maximum number of GTP’ messages, beyond the size of the BMA message
queue, that can be buffered for the PSD. The range is from 100 to 65535.
The default is 2000.
Release
Modification
12.4(11)MD
This command was introduced.
Command
Description
Specifies the maximum number of general packet radio service
(GPRS) tunneling protocol prime (GTP’) messages that the CSG2
can buffer for all Billing Mediation Agents (BMAs).
Configures a Cisco Persistent Storage Device (PSD).