Cisco OL-15491-01 - Manual (Page 235)

A-235
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
sami rate all
sami rate all
To specify the bit rate limit to be used by the Service and Application Module for IP (SAMI) for each
PowerPC’s (PPC’s) traffic, CSG2 use the sami rate all command in global configuration mode. Use the
no form of this command to disable this feature.
sami rate bits-per-second all
no sami rate bits-per-second all
Syntax Description
Defaults The default rate is 1.9 Gbps (0x70000000).
Command Modes Global configuration
Command History
Examples The following example shows how to specify a bit rate limit of 1 Gbps (0x40000000):
sami rate 0x40000000 all
bits-per-second Number of bits per second that the SAMI rate-limiting code is to allow to be
forwarded to an individual PPC. The range is 1 bps to 2 Gbps (0x80000000).
The default value is 1.9 Gbps (0x70000000).
Release Modification
12.4(11)MD This command was introduced.