Cisco OL-15491-01 - Manual (Page 213)

A-213
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
parse protocol
parse protocol
To define how the CSG2 is to parse traffic for a content, use the parse protocol command in CSG2
content configuration mode. To restore the default setting, use the no form of this command.
parse protocol {ftp | http | imap | other | pop3 | rtsp | sip | smtp | wap {connection-oriented |
connectionless}}
no parse protocol
Syntax Description
Defaults The CSG2 parses the traffic as some other type of IP traffic, such as IP, TCP, or User Datagram Protocol
(UDP).
Command Modes CSG2 content configuration
Command History
Examples The following example specifies that the CSG2 is to parse traffic for this content as HTTP traffic:
ip csg content MOVIES
parse protocol http
ftp FTP traffic, with Layer 7 inspection of FTP control sessions.
http HTTP traffic.
imap Internet Message Access Protocol (IMAP) traffic.
other Some other type of IP traffic, such as IP, TCP, or User Datagram Protocol
(UDP). This is the default setting.
pop3 Post Office Protocol, version 3 (POP3) traffic.
rtsp Real Time Streaming Protocol (RTSP) traffic.
sip Session Initiation Protocol (SIP) traffic.
smtp Simple Mail Transfer Protocol (SMTP) traffic.
wap Wireless application protocol traffic.
connection-oriented Defines the WAP traffic as connection-oriented.
connectionless Defines the WAP traffic as connectionless.
Release Modification
12.4(11)MD This command was introduced.
12.4(15)MD The ftp and sip keywords were added.