Ip csg transport-type assign – Cisco OL-15491-01 User Manual
Page 170
A-170
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg transport-type assign
ip csg transport-type assign
To classify data traffic on the basis of its access path, use the ip csg transport-type assign command
in global configuration mode. To remove transport-type information, use the no form of this command.
ip csg transport-type assign ip-address value
no ip csg transport-type assign ip-address value
Syntax Description
Defaults
None
Command Modes
Global configuration
Command History
Usage Guidelines
Use the ip csg transport-type assign command to classify data traffic on the basis of its access path,
using the Network Access Server (NAS) IP address reported in the RADIUS Accounting Start message.
Transport-type information is reported in fixed record format call detail records (CDRs).
Examples
The following example creates a transport-type table and enters transport-type configuration mode:
ip csg transport-type assign 1.2.3.4 6
Related Commands
ip-address
IP address.
value
Transport-type value in the range 1 to 255.
Release
Modification
12.4(11)MD
This command was migrated from CSG1.
Changes from CSG1:
•
The name of the command changed from ip csg transport-type to ip csg
transport type assign.
•
The ip-address and value arguments were added.
Command
Description
Specifies a service class value.
Specifies an identifier or name for a service owner.
Specifies the mode for a CSG2 billing plan.
Specifies variable or fixed CDR format.