EVCO c-pro micro SAVE - Manual (Page 23)

C-PRO MICRO SAVE APPLICATION MANUAL
Page 23
4.2.11 Log pages
To display the alarms log, select HISTORIAN from the general menu or press ESC from the main
page to display this page:
move the cursor on “Show HISTORIAN >>” and push the ENTER key.
If no elements are present, “NO ALARMS” is displayed otherwise the following page is proposed:
In this page stand the information regarding the last element in the log.
To view the previous element move the cursor on “Next>>” and push the ENTER key. By repeating
this procedure it is possible to scroll all log elements until reaching the first element inserted. Once
reached the last element, on the request of the next element, the last element memorised is re-
proposed: log display is circular.
To exit the log pages, press the ESC key or wait 60 seconds for timeout. This level is not protected
by a password.
4.2.12 Project and Firmware Versions
Press the LEFT+RIGHT keys at the same time for about 3 seconds. The information regarding the
versions of the project and the controller firmware are displayed.
To return to the main application page, press the ESC key.
State of the log
Date and time of the
Running number of the record
Alarm code
Ok: correct reading
Empty: empty memory
Overflow: memory full
Error: failed log reading
Alarm value