EVCO c-pro micro SAVE - Manual (Page 20)

C-PRO MICRO SAVE APPLICATION MANUAL
Page 20
4.2.5 RTC Menu
This menu contains the functionalities linked to the system RTC:
⋅
the setting of the clock
⋅
setting the COMFORT/ECONOMY time bands
To enter this menu, press ENTER on the RTC mask from the main menu.
In this page it is possible to set the system clock and the two time periods of the fans’ automatic
working (parameters PT01 and PT02). By pushing the ESC key from this menu it is possible to go
back to the general menu.
4.2.6 Manufacturer Menu
The Manufacturer menu is on level 3, that is the level 3 password must be taped in for entering the
menu and display/modify the parameters present in this branch. This menu can only be accessed
with the unit OFF.
Compact version Complete version
The manufacturer menu contains all parameters relevant to unit configuration.
In the CONFIGURATION menu it is possible to display/modify the parameters relevant for the
design features of the unit.
In the FANS, HEATING, OUTDOOR AIR DAMPER and RECOVERY HEAT EXCHANGER menus,
it is possible to set the parameters relevant to management of the devices.
In the SAFETIES menu stand all parameters concerning the alarms and the management of the
safety conditions for the controlled devices.
In the VARIOUS PARAMETERS menu stand other general parameters, moreover, entering this
menu it is possible to access the page for resetting the parameters to factory default values.