EVCO c-pro micro SAVE - Manual (Page 21)

C-PRO MICRO SAVE APPLICATION MANUAL
Page 21
4.2.7 Main OFF page
The main OFF page changes depending on the reason why the unit is OFF. There are three
possibilities:
1. Unit OFF: Unit switched-off pushing the relevant key
2. Unit OFF by Start-Stop: Unit ON by key but OFF due to digital contact DI/2 Start-Stop in
“Stop” position
3. Unit OFF by Supervisor: Unit ON by key but OFF due to a Modbus command from the
supervision module.
4. Unit OFF by Alarm: Unit switched-ON by key but switched-OFF due to unit block alarms.
Note: The MANUFACTURER menu can only be accessed if the unit is in one of these states.
4.2.8 Main ON page
The main page is displayed when the unit is in ON mode:
COMPACT VERSION
Alarm icon: appears when there are
active alarms. If all of them have been
viewed
the icon becomes fixed,
otherwise (some active alarms not
viewed) the icon keeps flashing.
From the main page it is possible to access the state pages by pressing the RIGHT key. Pressing
ESC it’s possible to go to the page for displaying the alarms and log.
Fans speed
Recovery Heat Exchanger Bypass damper status
Information regarding the fans working mode:
- COMFORT: Comfort period automatic control
- COMFORT+P.: Comfort period automatic control
WITH presence sensor active.
- ECONOMY: Economy period automatic control.
- ECONOMY+P.: Economy period automatic control
WITH presence sensor active.
- NOT WORKING DAY: Automatic control during
not working days
- RTC ERROR: Automatic control during RTC error
- MANUAL: Manual control