EVCO c-pro micro SAVE - Manual (Page 17)

C-PRO MICRO SAVE APPLICATION MANUAL
Page 17
4 User interface
4.1 Display and keyboard
Both control solutions (compact and complete) use the Vgraph user terminal equipped with LCD
graphic display 128x64 pixel and 6 keys. The terminal can be panel mounted (IP 65 with optional
gasket) on the unit or remote using EVCO wall box or in wall recess boxes type “506”. Besides the
EVCO front plates it is possible to use BTicino “Living” or “Light” series plates.
4.1.1 V-graph interface
The interface is connected via CAN to the controller
The keyboard has 6 keys for page navigation and editing values, with the following meaning:
- UP and DOWN: in editing they modify the parameter values, otherwise they move the
cursor. If the DOWN button is pushed for about 2 seconds the buzzer is silenced.
-
LEFT and RIGHT: display of the masks in succession.
- ENTER: in editing it confirms the value, otherwise it sends any control associated to the text
where the cursor is positioned. If an alarm page is being displayed pushing this key for
about 2 seconds causes the alarm reset. If the alarms pages are being displayed a short push
moves to the following active alarm.
- ESC: in editing it cancel the modification, otherwise it requests for default page associated
to the current page. If the ESC key is pressed for about 2 seconds the unit is switched on/off.