17 technical data, 1 technical data – EVCO EVFTFT818P7U Installer manual User Manual
Page 88
EVCO S.p.A.
EVFTFT818 | Installer manual ver. 2.1 | Code 144FTFT818E214
page 88 of 94
17
TECHNICAL DATA
17.1
Technical data
Purpose of the device:
blast chiller controller.
Execution:
user interface
control module
board without cover behind a
Plexiglas sheet.
board without cover.
Dimensions:
user interface
control module
200.0 x 135.0 x 28.0 ±0.6 mm
(7.874
x
5.314
x
1.102
±0.023 in; L x H x D).
166.0 x 116.0 x 44.0 mm
(6.535 x 4.566 x 1.732 in;
L x H x D).
Installation:
user interface
control module
back panel via studs.
on flat surface, with spacers.
Protection rating:
user interface
control module
IP65.
IP00.
Connections:
user interface
control module
removable screw terminal board
(control module and RS-485
serial port).
removable screw terminal board
(user interface, power supply,
inputs, outputs).
The
maximum
length
of
the
user
interface
-control module connection is 10 m (32.808 ft).
Temperature of use:
from 0 to 55 °C (from 32 to 131 °F).
Storage temperature:
from -10 to 70 °C (from 14 to 158 F).
Humidity for use:
from 10% to 90% relative humidity without condensate.
Pollution situation:
normal.
Power supply:
user interface
control module
supplied
from
the
control
module.
230 VAC (±15%), 50/60 Hz (±3
Hz), 10 VA max.