EVCO EVFTFT818P7U Installer manual - Manual (Page 53)

EVCO S.p.A. EVFTFT818 | Installer manual ver. 2.1 | Code 144FTFT818E214
page 53 of 94
10 COMPRESSOR OPERATING HOURS COUNT
10.1 Display of compressor operating hours
Operate as follows:
1. Make sure that the instrument is in the “on” status.
2. Make sure that the keyboard is not locked and that no procedure is in progress.
3. Press and release the HOME key (1), press and release the MENU key (2) and then press and release the
key repeatedly (3) in order to select the “INTERNAL VALUES”.
4. Press and release the key (4) and then repeatedly press and release the key (5) or the key (6) to
select “CH”.
Operate as follows to exit the procedure:
5. Press and release the ESCAPE key or do not operate for 60 s.
To delete the compressor operating hours, see paragraph 10.3 "Restoring the factory settings".