EVCO EVFTFT818P7U Installer manual - Manual (Page 52)

EVCO S.p.A. EVFTFT818 | Installer manual ver. 2.1 | Code 144FTFT818E214
page 52 of 94
3. Press and release the HOME key (1), press and release the MENU key (2) and then press and release the
key (3) in order to select the “HACCP ALARMS”.
4. Press and release the key (4), press and release the key (5) or the key (6) to select the alarm and
then press and release the key (7).
5. Repeatedly press and release the key to set “149” and then press and release the key.
Operate as follows to exit the procedure:
6. Press and release the ESCAPE key or do not operate for 60 s.