EVCO EVFTFT818P7U Installer manual - Manual (Page 57)

EVCO S.p.A. EVFTFT818 | Installer manual ver. 2.1 | Code 144FTFT818E214
page 57 of 94
Operate as follows to exit the procedure:
3. Press and release the ESCAPE key or do not operate for 60 s.
11.3.4 Deleting favourites
Operate as follows:
1. Access to the; see paragraph 10.3.1 “Access to the procedure”.
2. Press and release the key (1) to select “Programs”, repeatedly press and release the key (2) to set
“149” and then press and release the key (3).
Operate as follows to exit the procedure:
3. Press and release the ESCAPE key or do not operate for 60 s.
11.3.5 Deleting the compressor operating hours
Operate as follows:
1. Access to the; see paragraph 10.3.1 “Access to the procedure”.
2. Press and release the key (1) to select “rCH”, repeatedly press and release the key (2) to set “149” and
then press and release the key (3).
Operate as follows to exit the procedure:
3. Press and release the ESCAPE key or do not operate for 60 s.