Printer setup, Installing the mfc-7000 series dos tools, Using the brother mfc-7000 series printer driver – Brother MFC7000FC User Manual
Page 94
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
C H A P T E R E i l V E N
Printer Setup
Paper Feed Mode
Quality
Page Length
Font
Character Set
International Character Set
AutoLF
Text Print Direction
Character Pitch
LF Pitch
Auto CR
Zero Font
Paper Size
Black Emphasis
Code Page
Condensed
Installing the MFC-7000 Series DOS Tools
Use these tools only in the DOS environment. When you print in DOS mode,
select an EPSON ESC/P (LQ-510, LQ-850, LQ-2550) compatible emulation
driver in your application.
^ Insert the supplied CD-ROM labeled “CD-ROM 1” into your CD-ROM drive,
t Type CD X:\MFLPR0\D1SK6\D0ST00L
^ Type DOSETUP, then press [bittrl. The main screen appears on your
computer.
Make your selection from the list above.Installing the Maintenance Utility
Program
Using the Brother MFC-7000
Series Printer Driver
The Brother MFC-7000 Series printer driver enables you to change settings and
override defaults as you change your paper, document type, and colors for
printing. In the Brother MFC-7000 Series on BRMFC: Properties dialog box there
are three tabs; P^r, Quality/Color, and Control/Maintenance, so you can change
print properties as needed.