beautypg.com

How to improve print quality, Test print, L.test print – Brother MFC7000FC User Manual

Page 121

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

T R O U B L E S H O O T I N G ^ , A N D M A f N T E N A N C E ^

113

iMSIwWiHwCalls . . . . . . . . ^ .. ................................................................................... " .....^

Double Ring in F/T Mode

The MFC knows the incoming call is not a fax so it is signaling you to answer the
telephone call. Pick up the MFC handset or answer from an extension phone and
press your MFC’s Remote Deactivation Code (default setting is #51).

TYansferring a Fax Call to the MFC

If you answered at the MFC, press START and hang up immediately. If you

answered at an extension phone, press your Remote Activation Code ((¿fault

setting is *51). When your MFC answers, hang up.

SsiiiwsiidlSwfcz

You see the “New Hardware Found"

message on your PC screen (although you
have already installed the drivers in

Windows 95).

Click on the ‘Do not install a driver. (Windows will not prompt you again)’ and
click ’OK’.

The MFC does not print the data in the
correct position.

Select the correct paper size using the DOS Utility program. Since paper
adjustment is different between ESC/P (right) arid the MFC (center), the printing

position should be adjusted for the MFC.

Cannot perform '2 in 1' printing.

Check if the paper size setting in the application and in the printer driver are the

same.

Caimot print when using Paint Brush.

Try setting the Di^lay setting to '256 colors'.

Cannot print when using Adobe Illustrator.

Try to reduce the printing resolution.

Thick line and thin line appear alternately,

(banding)

Him OFF 'Bi-Directional Printing' from the ‘Control/Maintenance’ tab in the
printer driver.

There are some dense lines.

Tim ON ‘Reverse Order’ from the 'Paper' tab in the printer driver.

When using ATM fonts, some characters are
missing or some characters are printed in

the same place.

If you are using Windows 95, select ‘Printer Settings’ from the 'Start' menu. Open
'Brother MFC-7000’ properties. Click ‘Spool Setting’ on the ‘Details’ tab. Select
■RAW’ from ‘Spool Data Format'.

When using Power Point or Excel, hatch

pattern is not what you are expecting.

Open the 'Quality/Colour' tab in the printer driver and select the 'Document Type'

to ‘Photo’.

How to Improve Print Quality

Test Print____________________________________

If the quality is not satisfxtory, first print a test page to help you identify settings

you may want to change.

If- Press

iFunctionl.

(Tl. rn. The screen displays

l.Test Print

^ Press

^ Press (^. The MFC begins printing.

#• Press W to exit.