Brother MFC7000FC - Manual (Page 77)

Remote Control Commands
Remote control commands Detail Operation
91 Playing voice messages After one long beep, the MFC plays ICM, Memo and
Voice Alarm.
(Skip back) Press m while listening to an ICM, Memo or Voice Alarm
message to play it again. If you press Q] before a message, you
will hear the previous message._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
(Skip next) While playing ICM, Memo and Voice Alarm, you can skip to
next message._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9 STOP Playing Stop playing the ICM, Memo and Voice Alarm.
92 Record Memo After one long beep, you can record a memo. You can stop
recording by pressing U)._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
93 Erase all ICM & Memo If you hear one long beep, the erase is accepted. If you hear
three short beeps, you cannot erase because all voice messages
have not been played, or there is no voice message to erase.
*This code erases all recorded messages, not one by one.
94 Play and Record 0€M
in memory_____________
1 Play 1 MSGCTROGM
2 F/TOGM
The MFC plays the selected OCM. You can stop playing OGMs by
pressing (il.
2 Record 1 MSGCTROGM
2 F/TOGM
After one long beep, you can record the seleaed OGM. You will
hear the message played once. You can stop recording the
message by pressings)._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
95 Changing Fax Forwarding/
»"aglaRsettiiiK_____
1 OFF
2 Fax Forwarding
3 Paging
4 FAXFWDNO.
5 FWD NO. CONFIRM
If you hear one long beep, the change is accepted. If you hear
three short beeps, you cannot change it because the conditions
have not been met (Example: registering paging number).
You can register your fax forwarding number by using
4. FAX FWD NO (See page 66). Once you have registered
the number; the MFC will automatically turn to "FAXFWDrON”
mode. Then retrieve a Memory Status List by entering ElSn]
(See page 62). After you make sure that the Fax Forwarding
number you registered is correct in the List, enter the confirma­
tion command
SEUI]. Now the MFC will start Fax Forwarding.
96 Retrieve Fax
1 Memory Status List
You must call from a remote fax machine in order to receive a
report or stored fax messages. (See page 62.)
2 00 Retrieve dll FAX
2 “MSG No." OO
Retrieve by MSG
number
3 Erase FAX in the
memory_____
If you hear one long beep, you can erase the fax message from
the memory._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
97 Check the fecdviag status
I FAX
2 TAD
You can check whether your fax machine has received any FAX
or TAD messages. If yes, you will hear one long beep. If no, you
will hear three short bee^.
98 Change Answer Mode
1 MSGCTR
2 F/T
3 FAX
If you hear one long beep, you can change the answer mode. If
you hear three short beeps, you cannot change iL (Example;
There Is no MSG CTR OGM when you want to change to MSG
CTRmode.)
90 Exit A fter a long beep, you can exit rem ote control.