Brother MFC7000FC - Manual (Page 66)

Flexible Memory Settings
Message Center Mode offers you six flexible memory settings, so that you can
decide which kinds of messages you want to receive.
1. FAX:ON VOICErON Both voice and fax messages are stored. You can use
the Fax Forwarding or Paging features and retrieve
voice and fax messages remotely.
2. FAXrON VOICE:EXT You need an external answering machine connected
to the EXT jack for this setting. Fax messages are
stored in the message center memory, but voice
messages are stored in your external answering
machine. Retrieve voice messages from the external
answering machine. You cannot use the Paging
feature with this setting.
3. FAX:ON VOICEcOFF All memory is used to store fax messages—no voice
messages will be stored.
4. FAXrOFF VOICErON All memory is used to store voice mess^es—no fax
messages will be stored. Incoming faxes will print on
paper. You can use the Paging feature, and retrieve
voice messages remotely.
5. FAXrOFF VOICErEXT You need an external answering machine connected
to the EXT jack for this setting. Incoming faxes are
not stored in memory, but will print on paper. Voice
messages are stored in the external answering machine.
6. FAXrOFF VOICEcOFF Incoming faxes are not stored in memory, but will
print on paper. Voice calls are not stored in memory.
Setting Up Message Center_________________
You must set up Message Center in the following order:
IF Set Message Stor^e.
# Record Message Center Outgoing Message (MSG CTR OGM).
Activate Message Center Mode by pressing [Model until the FAX and F/T lights
are on.