Receiving faxes, Print call back message, Multiple resolution tyansmlssion – Brother MFC7000FC User Manual

Page 44: Operation from extension telephone

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

I® Enter the fax number, and press

you’ve set Call Reservation to

ON,

pick up your handset if the MFC rings.

You cannot use auto redial with Call Reservation. You cannot use Call

Reservation with Delayed Transmission or with Polling. You must register your

Station ID number to set Call Back Message to

ON.

Print Call Back Message_____________________

Press [Funciionl. m. (D. in.

2 Press (^.

Multiple Resolution Tyansmlssion__________

Use this feature to select separate resolution settings for each page of the fax

you're sending. This could be useful if you're sending a fax with photos and

letters, or some pages with small print and others with normal print. Resolution

settings return to

STANDARD

after the fax is sent,

ij'

Insert documents in feeder, then press

IFunctionl. [T], [T], (T).

2 Use 13 or 0 to select resolution for page 1, then press

3 Repeat Step 2 for subsequent pages. Press Q when you’re finished.

H Enter the fax number you're calling, and press [^.

Receiving Faxes

See

F/T Ring

Time

in the Setup

Manual

p. 22

Operation from Extension Telephone

If you answer a fax call on an extension phone, you can make your MFC take

over by using the Activation Code. When you press the Activation Code

® S CD.

the MFC starts to receive a fax.

If the MFC answers a voice call and double-rings for you to take over, use the

Deactivation Code [§) [3 D] to take the call at an extension phone.

If you answer a call, and no one is on the line, assume you’re receiving a fax.

At the MFC phone, press then hang up. At an extension phone, press
@ d] [D. wait for fax receiving tones (chirps), then hang up. (Your caller will

have to press to send the fax.)