Brother MFC7000FC - Manual (Page 34)

^ C H A P T E R E I V E
See
Storing One
Touch Dial
Numbers
in the Setup
Manual
p.23
One Touch Dialing
See
Storing
speed Dial
Numbers
in the Setup
Manual
p. 24
Pick up the handset— OR —Press iSpeoker Phone |.
^ When you hear a dial tone, press the One Touch key of the location you want
to call.
# To hang up, replace the handset— OR —Press [Speoker Phone|.
If you try to use a One Touch location with no number stored in it, you hear
a warning sound, and screen displays “NOT REGISTERED.” The display
returns to normal after 2 seconds.
Speed Dialing
^ Pick up the handset— OR —Press ISpeoker Phone |.
# When you hear a dial tone, press [Speed Diol|. then press the two-digit
Speed Dial number.
# To hang up, replace the handset— OR —Press [Speaker Phone j.
Hold_________________________________________
W Press [H^ to put a call on Hold.
¡2 You can put down the handset without disconnecting the call.
0 Pick up the MFC handset or press [Speoker Phone[ to release the call from Hold.
Pause
Press [Rediol/Pousej to insert a 3-5 second pause between numbers. If you need a
pause longer than 3.5 seconds, please call Customer Service at 1-800-284-4329
for assistance.
Tone/Pulse
If you have pulse dialing service, but need to send tone signals (for telephone
banking, for example), follow the directions below. If you have touch tone service,
you do not need this feature to send tone signals.
^ Lift the handset.
r2 Press [§. Any digits dialed after this send tone signals.
i8 When you hang up, the MFC returns to pulse dialing service.