Programming a fax forwarding number, Fax forward, Fwdit – Brother MFC7000FC User Manual
Page 74: Enter s set, Voice alarm, Setting voice alarm, Set day=today, Select « set, Pressifunctionl.m.iti.it, Ifunctionl. |re(orj
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
-Tr^'Tnnr- ""
"p
C H A P T E R E I G
Programming a Fax Forwarding Number
^
PressIFunctionl.m.iTI.IT].
^ Press E or B until the screen displays
FAX FORWARD,
Press ®. The screen prompts you to enter the number of the fax machine
where faxes will be forwarded.
C
FWDit;
_mmm
ENTER S SET
:)
Enter the forwarding number (up to 20 digits).
Press 0.
Press H to exit.
Voice Alarm
The Voice Alarm allows you to record a message on the MFC and have it played
back at a time you specify. These messages are not included in your voice mess^e
(VOICE) count When the scheduled day and time arrives, the MFC beeps and
plays the recorded message. Repeat the message by pressing (T). Press (T] or (
to stop Voice Alarm playback.
Setting Voice Alarm
^ Press
IFunctionl. |Re(orJ|.
If you don’t press
[RecorJI
within 2 seconds of
[Functionl.
you will not be able to continue.
H After 2 seconds, the screen displays
C
SET DAY=TODAY
SELECT «
SET
• Press E or B to select a day.
H- Press @ when the screen displays your selection.
# Enter the time in 24-hour format (for example, enter 20:30 for 8:30 PM).