Select paper ivpe, L.prper type, Pflperlplflin – Brother MFC7000FC User Manual
Page 58: Paper:ink jet, Pfiperrglossy, Paper:trnsprncy, Select paper type
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
C H A P T E R S E V E N
Select Paper IVpe
^ Press [Functionl. m. rn. The screen displays
l.PRPER TYPE
# Press f^.
0 Press (T) or (T] to select your paper setting.
PflPERlPLflIN
PAPER:INK JET
PfiPERrGLOSSY
PAPER:TRNSPRNCY
l|> Press @ when the screen displays your selection.
If you use Brother coated paper for
36O dpi (BP36CL) or 720 dpi (BP72CL), select
PAPERrINK JET, then select
36ODPI or 720DPI. If you use non-Brother ink jet
paper, select PAPER:INK JET, then select OTHER. If you did not select
PAPERrINK JET, skip to step 7.
#
Press (◄] or |T] to select
36
ODPI, 720DPI, or OTHER.
#
Press®.
#
Press M to exit.
The MFC ejects paper with printed surfaces face down into the pq)er tray at the
front of the MFC. When you use transparencies, remove each sheet
immediately, to prevent a paper jam or curled sheets.