Messr6e 30 sec, Select « > & set, Setting toll saver – Brother MFC7000FC User Manual
Page 72: Recording a memo, Recording a conversation, Setting toll saver recording a memo, Ifunctionl, Ifunctionl. rn, Retordl
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

-------^r——-------------------------’™-
C H A P T E R E I G H T
... ............................. .................. . .......
See
Ring Delay
p.22
in the Setup
Manual
^ Press
IFunctionl.
(T), [8], [T]. The screen prompts you to select a maximum time.
C
MESSR6E 30 SEC
SELECT « > & SET
m Press 0 or (3 to select the maximum time setting for incoming messages.
r8' Press 0 when the screen displays your setting.
'W Press S to exit.
Setting Toll Saver
When you set the Toll Saver feature, the MFC answers after 4 rings if you don ’/
have messages, and after 2 rings if you do have messages. This way, when you call
the MFC, if it rings 3 times, you know you have no messi^es, and can hang up,
avoiding any toll charge.
When Toll Saver is ON, it overrides your Ring Delay setting. Toll Saver must be off
for the MFC to operate using your Ring Delay setting.
^ Press
IFunctionl. rn. [
b
1
. in.
^ Press 0 or 0 to select On (or OFF).
# Press 0 when the screen displays your selection.
Press S to exit.
Recording a Memo
A memo is stored and played as a voice message.
^ Press
[Retordl.
^ When the display prompts you to pick up the handset, speak into the handset
to record your memo. Your recording can be as long as the Incoming
Message Maximum Time.
0 Press S or replace the handset when you’re finished.
Recording a Conversation
You can record a telephone conversation by pressing iRword] during the conversa
tion. Your recording can be as long as the Incoming Message Maximum Time.
You and the other party will hear a beep every 15 seconds while recording. You
cannot record a conversation using the Speakerphone.