Quality, Media, Quality media – Brother MFC7000FC User Manual

Page 100

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Quality_______________________________________

Select the print quality. The print quality and speed are related. Higher quality takes
a longer time to print.

Draft:

360

X 180 dpi. The fastest print mode (approximately two to four

times faster than normal mode) and gives lower ink consump
tion. Use this mode to print large volume documents or a

document for proofing.

Normal:

O x

O dpi. Recommended mode for ordinary printouts. Good

print quality with comfortable printing speed.

Fine:

360

dpi for color and

O x 720 dpi for black. Better print

quality than normal and faster print speed than Super Fine.

Super Fine : 720 x 720 dpi. The finest print mode. Use this mode to print

precise images such as photographs. Since the print data is much

larger than normal mode, processing time, data transfer time,
and printing time will be longer.

Media________________________________________

Select the media to print on. The MFC changes the way it places dots depending

on the selected media type. To get good print output, make sure to select the

correct media type.

Selecting media type changes the print quality selection to the most suitable one

as listed below. We recommend that you print with the preset quality for best

printing result

Paper Type

Plain Paper

Coated(360) InkJet Paper
Coated(720) InkJet Paper
Glossy Paper

Transparency
Transparency (mirror)

Suitable print quality

Normal
Fine
Super Fine
Super Fine
Fine
Fine

NOTICE: Use only Brother original Coated Paper (InkJet), Glossy Paper, or

Transparencies to get the best print quality. Non-Brother special paper may not

produce the best quality.