Brother MFC7000FC - Manual (Page 69)

E S S A C E ^ ^ C E N T E R
Message Indicators
The Voice and/or FAX lights flash when you have voice messages and/or faxes
waiting for your review. Once you listen to the message or print the fax, the light
stops flashing.
The LCD screen di^lays the total number of voice (including memos) and/or fax
mess^es stored in Message Center memory.
uoiCE:03 f a x :02
ONLINE____________
ICM Recording Monitor
This feature lets you adjust the speaker volume for voice messages you monitor as
they come in. You can select LOW, MED, or HIGH, or you can turn the monitor
OFF so you will not hear messages as they come in.
^ Press
IFumtionl.
m. iTl. in.
# Press (3 or E to select LOW, MED, HIGH, or OFF.
# Press 0 when the screen displays your selection.
Press S to exit.
Playing Voice Messages and Memos
(or Voice Alarm)
Follow the steps below to listen to voice mess^es and memos.
Press ®. Adjust volume by pressing Speaker Volume ® or
(Press [Function! and then ® for Voice Alarm.) All new messages and memos
are played in the order they were recorded. Press ® i^ain to hear all old
messages and memos in the order they were recorded. The display shows the
number of the current message, and the total number of messages.
If Caller ID information was received, the MFC beeps during the message and
displays the Caller ID information for one second.
During playback, the screen displays the time and date the messj^e was
recorded.
Press (3 to repeat a message. Use B to skip to the next message. You can
press 0 and E repeatedly until you reach the mess^e you want to play.
# Press W to exit.