Tiiming off bi-directional printing, Is your paper too thick or too thin, Don’t handle the paper until the ink is dry – Brother MFC7000FC User Manual
Page 124: Riming off bi-directional printing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
116
C H A P T E R T H J R T E E H
Tiiming Off Bi-directional Printing__________
You can further improve print quality by turning off bi-directional printing and
setting the MFC to print in one direction only. However, this will reduce print
speed by one half.
^ Press
[Functionl.
[T], (T|. The screen displays
3.BI-DIR PRINT
^ Press (T| to select ON or press |T| to select OFF.
Is your paper too thick or too thin?
Use paper that meets the specifications so it does not misfeed and jam. You can
use Cut Sheet, from 0.08 to 0.11 mm and Post Card 0.23 mm or thinner. If you
use thicker paper, the print head may scrape the surface of the paper, causing
stains. If you want to use thick paper, set the purple ADF Adjustment Lever to the
+(plus) side.
Don’t handle the paper until the ink is dry
Special ink jet, glossy and tran^arency paper will take longer to dry than plain
paper, so do not touch the printed copy until the ink has dried.