To change remote codes, Remote act.:on, Act.code:*51 – Brother MFC7000FC User Manual
Page 45: Deact.code:s51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
;
A D V A N C E D F A X O P E R A T I O N ^ *
For F/T (Fax/Tel) Mode Only
When the MFC is in F/T mode, it will use the F/T Ring Time (double ringing) to
alert you to a voice call. If you’re at the MFC, you can lift the handset to answer.
If you’re at an extension phone, you’ll need to lift the handset during the F/T
Ring Time and press g] [T) OD between the double rings. If no one is on the
line, or if someone wants to send you a fax, send the call back to the MFC by
pressing!*] [!]□.
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset Activation
Code is (3 d] (T). The preset Deactivation Code is(^[T] PI-
If you are always disconnected when accessing your TAD remotely, try changing
the Activation Code from [§ (Tj (T) to (§] IS ® the Deactivation Code
from (g d] Q] to (T) S S-
To change Remote Codes
Press
|Function|.m.
[71.
dl.
2 Press dl or [►] to select
ON
or
OFF.
REMOTE ACT.:ON
2 Press 0 when the screen displays the setting you want.
If you want to, enter a new Remote Activation Code, then wait 2 seconds.
ACT.
code
:*51
5 If you want to, enter a new Remote Deactivation Code, then wait 2 seconds.
DEACT.CODE:S51
%
Press W to exit