Brother MFC7000FC - Manual (Page 26)

Press |Resolirtion| (before you send the fax)to select the resolution for the
document you’re sending.
Standard—suitable for most typed documents.
Fine—good for small print; transmits slower than standard resolution.
Super Fine—good for small print or artwork; transmits slower than fine
resolution.
Photo—use when document has varying shades of gray; slowest
transmission time.
DO NOT use curled, wrinkled, folded, or ripped paper, or paper with staples,
paper clips, paste or tape attached. DO NOT use cardboard, newspaper, or
fabric.
Make sure documents written with ink are completely dry.
Contrast Setting
If your document is very light or very dark, you might want to set the contrast
accordingly. Use S.LIGHT to send a very light document. Use S.DARK to send a
very dark document.
^ Insert the document, face down, in the feeder.
Press iFunrtionl.
[Tl. ITI. [T|.
Use 0 or [T) to select AUTO, S.LIGHT, or S.DARK.
K When the screen di^lays your selection, press
M Press W to exit.
® Enter a fax number and press to send a fax.
Manual Transmission
See
One-Touch
Dialing
p. 26
See
Speed Dial
p. 26
Manual transmission lets you hear the dial tone, ringing, and fax chirps before
sending the fax.
Insert the document face down in the feeder.
Pick up the handset and listen for a dial tone—OR—press iSpeoker Phone|.
Enter the fax number you want to call (you can enter the digits using the
keypad, or you can enter a One Touch or Speed Dial number or you can
call from the Tel-index).
14' When you hear the fax tone, press (^.
If you’re using the handset, hang up.
NOTE: Manual Transmission does not use memory.