Brother MFC7000FC - Manual (Page 73)

Paging/Fax Forwarding_______________
When Paging is set to ON, your MFC dials the pager number you’ve programmed,
and dials your Personal Identification Number (PIN) when connected, to activate
your pager and let you know you have a fax or voice message in the Message
Center memory.
When Fax Forwarding is set to ON, your MFC dials the fax machine phone
number you’ve programmed, and forwards any faxes you’ve received.
You cannot use Paging and Fax Forwarding at the same time.
Programming Paging Number
H- Press
iFunctionl.
m.ril.in.
# Press 0 or 0 until the screen displays
PAGING
# Press The screen prompts you to enter your pager number.
C
PflGit:
ENTER & SET
II*
Enter your p^er phone number (up to 20 digits) followed by
[#) (S-
Do not
include the area code if it is the same as that of your MFC. For example,
EEllllilllllllillDDBSEffl®.
I5- Press
'%■ If your pager requires a PIN, enter the PIN, press (§], press iRediol/Pouse]. enter
your MFC telephone number, then press (§] (S For example,
aiT]0mm[i)iRedifli/pausemmm0fTimmmiTiiTim(5itt].
—OR—
if you do not need a PIN, press [Rediol/Pousel. enter the telephone number of
your MFC, then press (§) (§). For example, |R»dial/Pou$em[T]ro]
(gillSCDIDEiaBllIl).
Press®.
Press S to exit.
You cannot change a Paging number or PIN remotely.