Brother MFC7000FC - Manual (Page 22)

Brother coated (ink jet) paper is coated only on one side. Make sure this
whiter (coated) side is facing up toward you. Therefore, when loading paper
in the paper cassette, make sure that the whiter side (the coated side) is
facing up.
The coated side of glossy paper is shiny. Do not touch the shiny side. Load
glossy paper in the feeder with the shiny side facing up toward you.
DO NOT touch the coated side of the paper or both sides of Transparencies,
because it absorbs water and perspiration easily, and might cause decreased
ou^ut quality.
For optimum output quality, be sure to use paper appropriate for your
resolution setting.
Store paper in the original bag, and keep it sealed. Keep the paper flat and
away from moisture and direct sunlight and heat.
Transparencies designed for laser printers/copiers may stain your next
document. Use only recommended transparencies.
Paper Specifications
Paper Type Paper Size Cassette«1 Cassette#2 Manual Slot Cassette Capacity
Cut sheet A4, Lcttec Executive X X X 200 Sheets of 75 g/m^
Legal X X X 100 Sheets of 75 g/m'
Coated Paper A4, Letter X X X 100 Sheets (TBD)
TVansparencies A4, Letter X X 20
Glossy Paper A4, Letter X X 20
Envelopes DL.COM-10.C5,
B5, Monarch X X 10
Organizer J.K.L X X 10
Paper Capacity for Feeder
Cut sheet Paper Weight 60 to 120 g/m’ (l6 to 32 lb)
Sheet Feeder: Up to 22 mm (0.87 inches)/Approximately 200 Sheets of 75g/m^ (20 lb)
Output Stacker Approximately 75 Sheets of 75 g/m'
TVansparencies and glossy paper must be picked up from the paper tray page by page.
Curled or damaged paper may cause paper jams and misfeeds. If the paper
is curled, straighten it as much as possible by rolling it in the opposite
direction of the curl.
For optimum ouq>ut quality, we recommend you use only genuine Brother
paper.
If paper will not load from the Feeder, try the manual feed slot.
For fax reception paper size, see page 22.