Set time=q0:00 – Brother MFC7000FC User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
M\
(ii-
C W A P T E I X
Setup to Be Polled (Poll Waiting)
^ Place document in feeder.
If Press IFunctionl.ril.rn.in.
S Wait 2 seconds.
^
The screen displays
polling
:OFF
S Press (2 or (T) to choose ON.
IS Press ®. The screen displays
1. DOC
2.MEMORY
W’
Press
(T)
or
|T|
to make your selection.
S Press (^. The screen prompts you to press (^.
S Press and wait for the fax to be polled.
Once you set this feature, you will have to interrupt the timer to send a fax
[I],®)-
See
Interrupting
Timer and
Poll Waiting
p.30
Delayed Polling
You can set your MFC to begin polling at a later time.
Once you set this feature, you will have to interrupt the timer to send a fax
(IhinrtionI, 0,®).
S ’
Make sure no document is in the feeder.
H,
Press iFunctionl. 0.0. ®.
The screen displays
polling
:
off
'3 Press ® or 0 to choose ON.
Press®.
'%
Press 0. The screen prompts you to enter the time you want to begin polling.
SET TIME=Q0:00
Enter the time (in 24-hour format) you want to begin polling. For example,
enter 21:45 for 9:45 PM.