AERCO Innovation (G-13-1854 and above) - Manual (Page 42)

Innovation Water Heaters Installation, Operation & Maintenance Manual
CHAPTER 3 – OPERATION
Page 42 of
196 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913
OMM-0078_0J
PRI: 11/22/2013
Phone: 800-526-0288
GF-128
Table 3-3. Setup Menu
Available Choices or Limits
Menu Item Display Minimum Maximum Default
Password 0 9999 0
Language English English
Time 12:00 am 11:59 pm
Date 01/01/00 12/31/99
Unit of Temp Fahrenheit or Celsius Fahrenheit
Comm Address 0 127 0
Baud Rate 2400, 4800, 9600, 19.2K 9600
Software Ver 0.00 Ver 9.99
3.6 CONFIGURATION MENU
The Configuration Menu shown in Table 3-4 permits adjustment of the Internal Setpoint (Setpt)
temperature regardless of whether the valid password has been entered. Setpt is required for
operation in the Constant Setpoint mode. The remaining options in this menu require the valid
password to be entered, prior to changing existing entries. This menu contains a number of
other configuration settings which may or may not be displayed, depending on the current
operating mode setting.
NOTE
The Configuration Menu settings shown in Table 3-4 are Factory-
Set in accordance with the requirements specified for each
individual order. Therefore, under normal operating conditions, no
changes will be required.
Table 3-4. Configuration Menu
Available Choices or Limits
Menu Item Display Minimum Maximum Default
Internal Setpt Lo Temp
Limit
Hi Temp Limit 130°F
Unit Type KC Boiler, KC Boiler LN,
BMK Boiler, BMK Boiler LN,
BMK Boiler Dual, KC Water
Heater, KC Water Heater LN,
Innovation WH
Innovation
WH
Unit Size
(Only if Unit Type is
Innovation WH) 600 MBH, 800 MBH, 1060
MBH, 1350 MBH
600, 800,
1060 or
1350 MBH
Fuel Type Natural Gas, Propane Natural Gas
Water Heater Mode Constant Setpoint,
Remote Setpoint,
Constant
Setpoint