Pnotoshot), Photoshot), Benutzen – Panasonic NVDX100EG User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

DEUTSCH
Benutzen
des Camerarecorders als
Digltal’Fotokamera
(pnotoshot)
Mit dieser Funktion können Sie Standbilder je
7 Sekunden lang zusammen mit laufendem Ton
auf nehmen.
Dies ist beispielsweise praktisch für Bilder, die Sie auf
einem Video-Drucker drucken möchten.
1
Die Taste [PHOTO SHOT] drücken.
(Diese Funktion kann auch während
einer laufenden Aufnahme ausgelöst
werden.)
Der Camerarecorder nimmt ein Standbild ca.
7 Sekunden lang auf und schaltet dann auf
Aufnahmepause um.
• Das Bild auf dem LCD-Monitor oder im Sucher
steht ebenfalls still.
Wenn Sie [NEXT MENU] im Menü wählen und
dann [SHTR EFFECT] auf [ON] einstellen, blinkt
der Bildschirm kurz, und ein simuliertes Verschluß-
Klickgeräusch ist hörbar, wenn Sie die Taste
[PHOTO SHOT] drücken.
• Mit den Standbildern, die Sie im Photoshot-Modus
aufgenommen haben, können Sie folgendes
durchführen:
• Index-Suchlauf (-» 62)
(Ganz nahe am Bandanfang aufgenommene
Bilder lassen sich damit u. U. nicht finden.)
• Automatisches Drucken (-» 120)
« Wenn Sie [NEXT MENU] im Menü wählen und
dann [SHTR EFFECT] auf [ON] einstellen, werden
der visuelle Verschlußeffekt und das
Verschlußgeräusch ebenfalls mit aufgezeichnet.
(Der effektive Aufnahmestart erfolgt mit
geringfügiger Verzögerung nach Drücken der
Taste [PHOTO SHOT]. Der visuelle
Verschlußeffekt und das Klickgeräusch können
u. U. mit geringer Verzögerung nach
Aufnahmebeginn auftreten.)
♦ Die Bildqualität ist etwas schlechter.
❖ Beim Einsatz der Photoshot-Funktion verschwindet
die Bandrestzeit-Anzeige. Beim erneuten Starten
der normalen Aufnahme erscheint die
Bandrestzeit-Anzeige wieder.
ENGLISH
Using the Movie Camera as a
Digital Still Camera
(Photoshot)
With this function, you can record still pictures with sound
for approximately 7 seconds each.
This function is convenient for example for pictures that
you want to print on a Video Printer.
1
Press the [PHOTO SHOT] Button. (This
function can be used during recording,
too.)
The Movie Camera records a still picture for
approximately 7 seconds and then switches over to
the Recording Pause Mode.
• The image on the LCD Monitor or in the Finder also
stands still.
If you select [NEXT MENU] on the Menu and set
[SHTR EFFECT] to [ON], the screen blinks briefly
and a simulated shutter click sound can be heard
when you press the [PHOTO SHOT] Button.
• With the still pictures that you have recorded in the
Photoshot Mode, you can do the following:
• index Search (-» 62)
(However, searching for the picture(s) recorded at
the beginning of the tape may not be possible.)
• Automatic printing (-» 120)
♦ If you select [NEXT MENU] on the Menu and set
[SHTR EFFECT] to [ON], the visual shutter effect
and the click sound are also recorded. (There is a
slight delay between pressing the [PHOTO SHOT]
Button and the actual start of recording. The visual
shutter effect and dick sound may occur with slight
delay after recording of the still picture has started.)
« The picture quality deteriorates slightly.
♦ Using the Photoshot Function makes the
Remaining Tape Time indication disappear.
Resuming normal recording makes the Remaining
Tape Time Indication appear again.
-40-