Panasonic NVDX100EG User Manual
Page 122
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

DEUTSCH
ENGLISH
• Wenn die Kühlfunktion des Video-Druckers
eingeschaltet wird und sich die Druckgeschwindigkeit
verlangsamt, kann der automatische Druckvorgang
dadurch u. U. gestoppt werden. In diesem Fall
[AUTOPRINT] erneut auf [ON] einstellen.
• Beim Auswechseln der Farbfolien-Cassette oder des
Papiers während des Druckvorgangs kann das gleiche
Bild u. U. zweimal gedruckt werden.
• Wenn mehrere Standbilder nacheinander im
Photoshot-Modus aufgenommen werden, können
einige Bilder beim Drucken u. U. übersprungen
werden.
• Vor dem Eingeben eines Bildes in den Speicher des
Druckers die Taste [OSD] (-» 54) auf der
Fernbedienung des Camerarecorders drücken, damit
keine Anzeigen im Bild eingeblendet sind. Ansonsten
werden die Zählwerk-Anzeige und andere
Funktionsanzeigen im Bild eingeblendet gedruckt.
• in den folgenden Fällen können bei der Benutzung der
automatischen Druckfunktion u. U. einige Bilder
ausgelassen werden.
• Wenn Sie Standbilder drucken, die auf einem
Camerarecorder einer anderen Marke im Photoshot-
Modus aufgezeichnet worden sind.
• Wenn Sie zwischen dem Aufzeichnen von zwei
Standbildern im Photoshot-Modus den
Camerarecorder mehrmals (dreimal oder mehr) ein-
und wieder ausschalten.
• Wenn Sie ein Standbild im Photoshot-Modus auf
einer Bandstelle aufzeichnen, an welcher vorher
bereits ein Photoshot-Standbild autgezeichnet wurde.
• Wenn Sie zwischen dem Aufnehmen von zwei
Standbildern im Photoshot-Modus eine andere
Aufnahmegeschwindigkeit (SP/LP) wählen.
• Beim ersten zu druckenden Photoshot-Standbild.
• When the cooling function of the Video Printer is
activated and the printing speed slows down, the
automatic printing may stop. In this case, set
[AUTOPRINT] to [ON] again.
• If you replace the ink cassette or paper during printing,
the same picture may be printed twice.
• If still pictures are recorded successively in the
Photoshot Mode, some pictures may be skipped during
printing.
• Before storing an image in memory on the Video
Printer, press the [OSD] Button 54) on the Remote
Controller of the Movie Camera so that no indications
appear in the picture. Otherwise, the Counter Indication
and other function indications are also printed in the
picture.
« In the following cases, some pictures may be skipped
when printing with the Auto Print Function.
• When you print still pictures recorded in the
Photoshot Mode on a video camera of another brand.
• If you turn the Movie Camera on and off several
times (3 times or more) between recording two still
pictures in the Photoshot Mode.
• When you record a still picture in the Photoshot Mode
on the same part of a cassette where a Photoshot
picture was recorded before.
• When you select a different recording speed (SP/LP)
between the recording of two still pictures In the
Photoshot Mode.
• At the first Photoshot Picture to be printed.
-122-