Yamaha FX900 - Manual (Page 49)

F.SW MEMORY RCL
The FX900 permits memory selection via an optional
Yamaha FC4 or FC5 footswitch connected to the MEMORY
INC/DEC foots\witch jack. The F.SW MEMORY RCL function
permits setting the range of memory location numbers that
will be selected when the footswitch is pressed.
reached. After the last number in the specified range, the first
(lowest) number is selected and the process repeated.
Reverse sequences can be programmed by entering the
highest number in the range before the lowest, as shown
below.
F.SW MEMORY RCL
RANGE U31 TO U34
F.SW MEMORY RCL
RANGE U34 TO U31
If, for example, the RANGE parameter is set to "U31 TO
U34" as shown in the LCD illustration above, each time the
footswitch is pressed the next highest memory location will
be selected until the last number in the specified range is
In this case the selection sequence is: U34 •
U31
U34, etc.
■ U33 -> U32 ^
1. Use the [UTILITY] key to call the F.SW MEMORY RCL
display. The underline cursor should be located under
the first memory number in the range.
2. Use the [DATA ENTRY] control or
[A]
and
[T]
keys to
enter the first number in the range.
3. Press the cursor [ ►] key to move the cursor to the
second number in the range.
4. Use the [DATA ENTRY] control or
[A]
and
[T]
keys to
enter the second number in the range. The cursor [ ◄]
key can be used to return to the first number in the
range if necessary.
48