Yamaha SPX90 II User Manual
Yamaha
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- YAMAHA
- PRECAUTIONS
- FRONT PANEL
- REAR PANEL
- BASIC OPERATIONS
- UTILITY FUNCTIONS
- DESCRIPTION OF PROGRAMS AND PARAMETERS
- REVERBERATION TIME (R/T). Range: 0.3 ~99.0 sec
- 1. TYPE. Range: HALL, RANDOM. REVERSE, PLATE
- 2. ROOM SIZE. Range: 0.1 ~ 20.0
- 3. LIVENESS. Range: 0 ~10
- 4. DELAY. Range: 0.1 ~ 1800.0 msec
- 5. LPF. Range: 1.0 kHz ~ 11 kHz, THRU
- 1. LEFT CHANNEL DELAY TIME. Range: 0.1 ~
- 2. LEFT CHANNEL FEEDBACK GAIN. Range:
- 3. RIGHT CHANNEL DELAY TIME. Range: 0.1 ~ 2000.0 msec
- 4. RIGHT CHANNEL FEEDBACK GAIN. Range:
- 5. HIGH (FEEDBACK HIGH).Range: 0.1 ~ 1.0
- 1. LEFT CHANNEL DELAY TIME. Range: 0.1 ~
- 2. LEFT CHANNEL FEEDBACK GAIN. Range:
- 3. RIGHT CHANNEL DELAY TIME. Range: 0.1 ~ 1000.0 msec
- 4. RIGHT CHANNEL FEEDBACK GAIN. Range: -99% ~ +99%
- 5. HIGH (FEEDBACK HIGH). Range: 0.1 ~ 1.0
- MODULATION
- PITCH CHANGE
- FREEZE
- 1. REC. MODE Selection. Range: Manual, Auto
- 2. TRIGGER DELAY. Range: -2000 ~ 2000msec.
- 3. RECORDING
- TRIGGERING
- • MANUAL Mode
- • AUTO Mode
- 4. OVERDUB Recording
- • FREEZE operation
- -MANUAL Mode only-
- PLAY
- 5. PLAYBACK
- 6. TRIGGER MASK (FREEZE A). Range:
- 10-2000.0 ms.
- ADR-NOISE GATE
- 1. REVERB TIME (R/T). Range: 0.3 ~ 99.0 sec
- 2. HIGH (High Frequency Reverb Time Ratio). Range: 0.1 ~ 1.0
- 3. DELAY. Range: 0.1 ~ 1000.0 msec
- 4. HPF (High Pass Filter). Range: 32 Hz ~ 1.0 kHz, THRU
- 5. LPF (Low Pass Filter). Range: 1.0 kHz ~ 11 kHz, THRU
- 6. TRIGGER LEVEL. Range: 0 ~ 100%
- 7. HOLD TIME. Range: 1 ~ 30,000 msec
- 8. RELEASE TIME. Range: 5 ~ 32,000 msec
- 9. MIDI TRIGGER. Range: ON, OFF
- TRIGGER LEVEL. Range: 1 ~ 100%
- 2. TRIGGER DELAY. Range: -100 100 msec
- 3. TRIGGER MASK. Range: 5 ~ 32,000 msec
- 4. ATTACK TIME. Range: 5 msec ~ 32,000 msec
- 5. DECAY TIME. Range: 5 msec ~ 32,000 msec
- 6. DECAY LEVEL. Range: 0 ~ 100%
- COMPRESSOR
- 7. HOLD TIME. Range: 1 msec ~ 30,000 msec
- RELEASE TIME. Range: 5 msec ~ 32,000 msec
- 9. MIDI TRIGGER. Range: ON, OFF
- 1. TRIGGER LEVEL. Range: 1 ~ 100%
- 2. TRIGGER DELAY. Range: -100 ~ 100 msec
- 4. ATTACK TIME. Range: 5 msec ~ 32,000 msec
- HOLD TIME. Range: 1 msec ~ 30,000 msec
- HOLD LEVEL. Range: 0 ~ 100%
- RELEASE TIME. Range: 5 msec ~ 32,000 msec
- 8. MIDI TRIGGER. Range: ON, OFF
- TRIGGERED PAN
- 1. PAN SPEED. Range: 0.1
- 40.0 Hz
- 2. DIRECTION. Range: L -> R, L
- R. L-
- 3. DEPTH. Range: 0 -100%
- 1. TRIGGER LEVEL. Range: 1 - 100%
- 2. TRIGGER DELAY. Range: -100 - 100 msec
- 3. TRIGGER MASK. Range: 5 - 32,000 msec
- 4. ATTACK TIME. Range; 5 msec - 32,000 msec
- 5. PANNING TIME. Range: 5 msec - 32,000 msec
- 6. RELEASE TIME. Range: 5 msec - 32,000 msec
- 7. DIRECTION. Range: L -R, L ^R
- 8. LPF. Range: 1.0 kHz - 11 kHz, THRU
- 9. DELAY. Range: 0.1 - 1800.0 msec
- 1. TRIGGER LEVEL. Range: 1 ~ 100%
- 2. VIBRATO DELAY. Range: 1 ~ 30,000 msec
- 3. VIBRATO RISE TIME. Range: 5 msec ~ 32,000 msec
- 4. VIBRATO FREQUENCY. Range: 0.1 ~ 20.0 Hz
- 5. VIBRATO DEPTH. Range: 0 -100%
- 6. MIDI TRIGGER. Range: ON, OFF
- 1. HPF. Range: THRU, 32 Hz ~ 1.0 kHz
- 2. MID FRO. Range: 315 Hz - 4.0 kHz
- 3. MID GAIN. Range:-15 - +15 dB
- 4. MID Q. Range: 0.5 ~ 5.0
- 5. HI FRO. Range: 800 Hz ~ 8.0 kHz
- 6. HI GAIN. Range: -15 ~ +15 dB
- 7. HI Q. Range: 0.5 ~ 5.0
- 8. LPF. Range: 1.0 kHz ~ 11 kHz, THRU
- 9. DELAY. Range: 0.1 ~ 1800.0 msec
- SAMPLE APPLICATIONS
- SPECIFICATIONS
- MIDI DATA FORMAT
- ROM CONTENTS AND CONTROLABLE PARAMETERS
- EARLY REFLECTION MODE CHART
- BLOCK DIAGRAM
- DIMENSIONS
- USER PROGRAMMING TABLE
- c
- PRECAUTIONS
- • VOLTAGE
- • TEMPERATURE ENVIRONNANTE
- • NETTOYAGE DE L'EXTERIEUR
- MESSAGES D'ERREUR
- Précautions à prendre lors de la manipulation du Matériel de Sonorisation
- STOCKER: SAUVEGARDER LES PRO- l GRAMMES EDITES
- PROGRAMMER LA BALANCE ET LE N1-
- I VEAU DE SORTIE
- BYPASS (Dérivation)
- FONCTIONS MIDI
- EDIT TITLE
- SPECIFICATION DES MEMOIRES QUI POURRONT ETRE RAPPELEES AU MOYEN DE LA COMMANDE AU PIED
- MODULATION
- I
- Remarque:
- 1. Sélection du mode REC. Options; Manuel, Auto
- 2. TRIGGER DELAY (Retard de déclenchement). Plage de réglage: -2000,0 2000,0
- msec.
- 3. ENREGISTREMENT
- DECLENCHEMENT
- Mode MANUEL
- Mode AUTO
- Enregistrement avec surdoublage (OVER- DUBBING)
- REPRODUCTION
- 6. TRIGGER MASK (FREEZE A).
- PARAMETRIC EQ
- FORMAT DES DONNEES MIDI
- PRECAUTIONS
- c
- VORSICHTSMASSNAHMEN
- VORDERSEITE
- RÜCKSEITE
- BASISOPERATIONEN
- GEBRAUCHSFUNKTIONEN
- BESCHREIBUNG DER PROGRAMME UND PARAMETER
- 1. HALLDAUER (R/T) Bereich: 0,3-99,0 Sek
- 2. HOCHFREQUENZHALLDAUER (HIGH)
- 3. VERZÖGERUNG (DELAY), Bereich: 0,1 -
- 4. HPF (HOCHPASSFILTER), Frequenzgang: THRU (durch), 31 Hz - 1,0 kHz
- 5. LPF (TIEFPASSFILTER) Frequenzgang: 1,0 kHz - 10 kHz, THRU
- 1. TYP: HALL, RANDOM, REVERSE, PLATE
- 2. RAUMABMESSUNGEN (ROOM SIZE), Bereich: 0,1 - 10,0
- 3. LEBENDIGKEIT (LIVENESS), Bereich 0-10
- 4. VERZÖGERUNG (DELAY): 0,1-1800,0 mSek
- 5. LPF-Einstellbereich: 1,0 kHz - 10 kHz, THRU
- VERZÖGERUNG (DELAY)
- MODULATION
- TONHÖHENÄNDERUNG
- EINFRIEREN
- NACHHALL UND KENNSCHALTUNG
- PARAMETRISCHER EQUALIZER
- 1. AUSLÖSERi»EGEL Bereich:!-100%
- 2. VIBRATOVERZÖGERUNG, Bereich:0~30000 mSek
- 3. VIBRATOEINSCHWINGZEIT, Bereich: 5
- 4. VIBRATOGESCHWINDIGKEIT, Bereich: 0,1-20,0 Hz
- 6. MIDI SCHALTIMPULS, Varianten: An/Aus
- HPF, Frequenzgang: DURCH, 32 Hz-1 kHz
- MITTEN (MID FRQ), Frequenzgang: 315 Hz - 4,0 kHz
- PEGEL DER MITTEN (MID GAIN), Bereich: -15-+15dB
- 4. MITTEN-Q (MID Q), Bereich: 0,5-5,0
- 5. HÖHEN (Hl FRQ), Frequenzgang: 800 Hz -
- 8,0 kHz
- 6. PEGEL DER HÖHEN, Bereich: -15 - +15dB
- 7. HÖHEN-Q
- 8. LPF, Frequenzgang: 1,0 kHz-11 kHz, DURCH
- 9. VERZÖGERUNG, Bereich: 0,1-1800,0 mSek
- ANWENDUNGSBEISPIELE
- TECHNISCHE DATEN
- MIDI DATENFORMAT
- ROM-INHALT UND REGELBARE PARAMETER
- FRUHREFLEXIONSTABELLE
- BLOCKDIAGRAMM
- ABMESSUNGEN
- BENUTZER-PROGRAMMIERUBERSICHT
- YAMAHA