Flipping & assigning effects, Flipping effect groups, Cde-icho-i-rvz 3 pcs cde^ho^pcs 3 rv2 – Yamaha FX900 User Manual

Page 16: Cde-,<;ill(>^pcs- 3 i

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Flipping & Assigning Effects

While in the algorithm assignment mode (while the [ALG] key is lit) you can rearrange the positions of the effect groups in the four

algorithm blocks by using the "flip" function, and assign specific effects from each group.

• Flipping Effect Groups

1,3

1. Press the [FLIP] key so that it lights (the [ALG] key will

also light if it was not already lit). For this example, we'l

flip the positions of the PCS (REV1 group) and RV2

(REV2 group) effects.

3. Press the [FLIP] key again, and the positions of the two

selected effects will be reversed. The [FLIP] key will also
go out.

CDE-iCHO-i-RVZ

3 PCS

CDE^HO^PCS

3 RV2

2. Press the EDIT keys corresponding to the effect groups

you want to flip — [REV1] and [REV2] in this case. The

effect names corresponding to the two selected effect
groups will flash alternately on the display.

---------------- vt-7-

CDE-,<;ill(>^PCS-

I ^