Rev2 (reverb 2) group, Rv2 — reverb 2, Er2 — early refections 2 – Yamaha FX900 User Manual
Page 42: Dl2 — mono delay 2, Ec2 — echo (stereo delay) 2, Mt2 — multi tap delay 2, R+d — reverb + delay, Dl1 — mono delay 1, Rv2 — reverb 2 • er2 — early refections 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ REV2 (Reverb 2) GROUP
• RV2 — Reverb 2
Same effect and parameters as RV1. Refer to page 31.
• ER2 — Early Refections 2
Same effect and parameters as ER1. Refer to page 32.
• DL2 — Mono Delay 2
Same effect and parameters as DL1, except that the range of
the DLYL and DLYR parameters is 0.1 — 740.0ms. Refer to
page 33.
• EC2 — Echo (Stereo Delay) 2
Same effect and parameters as EC1 except that the range of
the FBDL and FBDR parameters is 0.1 —270.0ms. Refer to
page 34.
• MT2 — Multi Tap Delay 2
Same effect and parameters as MT1 except that the range of
the DLY parameter is 0.1 — 640.0ms. Refer to page 37.
• R+D — Reverb + Delay
This effect functions iike separate reverb and deiay
processors connected in parallei.
DLYL DLYR
100.0
200.0
FBD
FB L/R
150.0 +10 RIO
RVT HP
2.4 6
R/D MIX LVL
L8 60
0
DLYL (Left Channel Delay Time: 0.1 —380.0 mS)
Sets the delay time of the left channel.
DLYR (Right Channel Delay Time: 0.1 — 380.0 mS)
Sets the delay time of the right channel.
41