To select a user defined point on the map, Figure 2-73: map –obs start, Figure 2-74: map – obs navigation – BendixKing AV8OR User Manual
Page 97
Honeywell Bendix/King AV8OR Handheld User’s Guide
D200803000008
VFR Moving Map Function
Rev 5 Mar 2012
Page 2-57
©
Honeywell International Inc. Do not copy without express permission of Honeywell
To select a user defined point on the map:
If the point the user touches is not a NAVAID point, then after the
OBS
soft key is tapped, a temporary WPT is created at that position.
The OBS course ends at that user defined temporary WPT.
To edit the OBS Course Angle, double tap on the OBS Course
Window to open a key pad.
After the OBS point is selected the OBS course selection window is
shown and the
DONE
,
and
CANCEL
OBS
soft keys are
displayed, as shown in the figure below.
Figure 2-73: Map –OBS Start
Tap the
DONE
soft key and the adjusted OBS course is activated
and a course is generated to the selected point, as shown in the
figure below.
Figure 2-74: Map – OBS Navigation
Tap the
OBS ADJUST
soft key to show the following window.