BendixKing AV8OR - Manual (Page 300)

Honeywell Bendix/King AV8OR Handheld User’s Guide
Automotive Mode Operation D200803000008
Page 3-88 Rev 5 Mar 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell
This symbol shows whether the field it is attached to is shown on the
map as a Trip Data. It also shows the position of the data as follows:
Symbol Description
This value is not shown on the map screen.
This value appears on the map screen in the Trip
Data area. This is the value at the top.
This value appears on the map screen in the Trip
Data area. This is the value in the middle.
This value appears on the map screen in the Trip
Data area. This is the value at the bottom.
TRIP COMPUTER SCREEN
The Trip Computer screen provides collected trip data. It can be
opened from the Trip Information screen by tapping
.
The fields on this screen are continuously updated while you keep
the screen open. You can switch between the trips, pause then
resume them, or reset their data. You have the following functions on
this screen:
Name Description
Pauses the trip currently shown on the screen.
Values on the screen stop changing.
This soft Key replaces the previous one if it has
been activated. Tap it to resume collecting trip
data.