Navigation settings, Navigation settings -113 – BendixKing AV8OR User Manual
Page 325

Honeywell Bendix/King AV8OR Handheld User’s Guide
D200803000008
Automotive Mode Operation
Rev 5 Mar 2012
Page 3-113
©
Honeywell International Inc. Do not copy without express permission of Honeywell
Soft Key
Description
Set Time Zone
Set time zone manually if you do not want to
synchronize the time zone automatically.
This allows you to use Auto Time Correction
and apply a time zone offset to obtain the
desired time.
Compare GPS and
device times
The current time of the GPS receiver and the
device clock are displayed. Please note that
the GPS clock is only available with GPS
reception. This allows you to check whether
any correction is needed.
Navigation Settings
You can control how
GoDrive
behaves during navigation. Tap the
following soft Keys:
,
,
.
Soft Key
Description
Keep Position on
Road
This feature allows car drivers to always
correct GPS position errors by matching the
vehicle position to the road network. For
pedestrian navigation, this feature is
automatically disabled to let the software
show your exact position. By turning off this
feature you also turn off the GPS position
error filtering. The position shown on the
map will be subject to all position errors and
position fluctuations.
Off-route
Recalculation
This switch tells
GoDrive
whether to
automatically recalculate the route when you
deviate from it. If this feature is turned off,
you need to initiate route recalculation
manually otherwise navigation will be
stopped until you return to the originally
recommended route. Setting another point
than the current GPS position as the start
point of the active route will automatically
disable this feature.