Selecting an intersection as the destination, Selecting an intersection as the destination -47 – BendixKing AV8OR User Manual
Page 259

Honeywell Bendix/King AV8OR Handheld User’s Guide
D200803000008
Automotive Mode Operation
Rev 5 Mar 2012
Page 3-47
©
Honeywell International Inc. Do not copy without express permission of Honeywell
it appears automatically.
4. Instead of picking one of the streets, tap
5. Enter the house number:
1.
Tap .
2.
Enter the house number on the keyboard.
3.
Tap
to finish entering the address.
6. A list appears with the matching addresses. Tap the desired one.
7. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
SELECTING AN INTERSECTION AS THE DESTINATION
The procedure is explained starting from the Navigation menu.
1.
Tap the following soft Keys:
(Simple mode), or
,
(Advanced mode).
2.
By default,
GoDrive
proposes the country/state and settlement
where you are. If needed, tap the soft Key with the name of the
country/state, and select a different one from the list.
3.
If needed, change the settlement:
•
To select the settlement from the list of recently used ones,
tap the
soft Key.
•
To enter a new settlement:
1. Tap the soft Key with the name of the settlement, or if