BendixKing AV8OR - Manual (Page 199)

Honeywell Bendix/King AV8OR Handheld User’s Guide
D200803000008 System Setup Function
Rev 5 Mar 2012 Page 2-159
© Honeywell International Inc. Do not copy without express permission of Honeywell
Tap the RESET COLUMNS soft key to set the column heading to
their factory defaults.
DEMO MODE SETUP
The data in the Demo Mode Setup window Figure 2-207 is used to
control the starting position, altitude, speed and initial track of the
simulator. You must select
DEMO MODE on initial turn on to show
this menu selection See the Demo Mode section on page 2-4 for
instructions on how to enable Demo Mode.
Figure 2-207: System Setup – Demo Mode Setup
Scroll up and down between the options, and set the values.
•
Ident: Use the Ident field to assign a name to the Initial Position
(manual entry). Highlight the Ident and enter the Ident input
entry, the virtual keyboard is displayed. Input the Ident name
characters. The system will search for similar Ident names in the
database based on the character being input, as shown in the
figure below. As an example when the user inputs
LOS ANG ,
the system will display similar Ident names such as LOS
ANGELES/VAN NUYS . This function is convenient for the user
by finishing the input of the full Ident name. The user can also
define a new name for the Ident.