Figure 2-45: map – airport filter – BendixKing AV8OR User Manual

Page 80

Honeywell Bendix/King AV8OR Handheld User’s Guide

VFR Moving Map Function

D200803000008

Page 2-40

Rev 5 Mar 2012

Honeywell International Inc. Do not copy without express permission of Honeywell

position directly to the selected airport. The new Direct-To course is
displayed on the map.

Tap the

AIRPORT FILTER

soft key to configure the airport filter by

setting the minimum runway length and surface requirements. The
filter will not allow airports below the minimum requirements to be
displayed in the list.

Figure 2-45: Map – Airport Filter

Double tap on the

Minimum length

selection to display a numeric

keypad to enter the minimum length.

The

minimum runway length will be rounded to the nearest hundred feet.

Double tap on the

Required surface

selection to select the type of

surface for the airports you want to filter.

Any

Hard Only

can be selected for the required runway surface.

Tap the

DONE

soft key to accept the changes.

Only airports that match the filter conditions will now show in the
Nearest Airports window.