1 brooktrout tr1034 – FaxBack NET SatisFAXtion 8.7 (Including R3) - Manual User Manual

Page 21

2 – Server Administration

NET SatisFAXtion 8.7 Manual

Select a port, and you can enable and disable send and receive capabilities using
the

Allow port to... Send Faxes, Receive Faxes

checkboxes at the bottom of the

window.

2.2.1.1.1

Brooktrout TR1034

Configured ports on Brooktrout TR1034 cards (and recent models of TruFax
100 and 200 cards) will not show up in

Change Server Settings.

Configuration

must be done in the registry. Under

[HKLM\Software\FaxBack\ICANFax]

you

will find one key per port. Look for keys named similarly to

BOS_02_001

. Under

each key will be a

mode

string value, this controls whether a port can send or

receive.

[HKLM\Software\FaxBack\ICANFax\]

mode" = "fax_in,fax_out"

Set the mode to reflect how you want the port configured. To only send faxes,
set

"mode" = "fax_out"

. To only receive faxes, set

"mode" = "fax_in"

. To

disable the port, set

"mode" = ""

(i.e. remove the value from

mode

Manually restart the NET SatisFAXtion service after making any changes to the
registry.

Illustration 2.2.1.1#1: Change Server Settings – Fax Hardware Settings