Appendix, Secim – Garmin 210 User Manual

Page 72

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECim

APPENDIX

liistdllalion

WARNING!

The GPSMAP system has no user-serviceable

parts, and you should never attempt any

repairs yourself. The unit has been filled with

dry nitrogen to prevent moisture penetration.

Opening the case or loosening any fittings may

expose internal components to moisture and

mil void the manufacturer’s warranty!

Should your unit ever need repair, take it to

an authorized GARMIN service center.

Your GPSMAP system includes the following hardware components:

GPSMAP Unit

Gimbal Mount Bracket

GPS Antenna with 30’ cable (210/220 models only)

Power/Data Cable

If you are missing any of these pieces, see your dealer. To complete the stan

dard installation, you’ll also need the following:

2-amp in-line fuse (may be included with Power/Data cable)

Four 1/4” (6 mm) diameter mounting screws

1” X 14 thread antenna mount and screws

Several optional accessories are also available to provide flexible installation

on any vessel. See your Garmin dealer for more information on these items:

Flush Mount Kit

Antenna Cable Extension

110/220 volt AC adapter

* ^

Reading through the entire installation section before starting your installation will

help you get the most out of your BARMIN navigation system. An improper or poorly

planned installation can affect the GPS receiver's accuracy and the overall perfor

mance of the GPSMAP system.