Garmin 210 - Manual (Page 13)

Now that you are back at the Status Page, let’s enter a starting position for
our tour. Entering names and numbers in the GPSMAP system is done through
data entry windows. Once a data entry window is open, the arrow keypad and
ENTER key are used to choose and accept a value for each character position:
1. Press the# key to highlight the position field.
2. Press the ® key to begin entry of the following position;
N23° 41.368', W 077” 48.533'
3. Use the # keypad to highlight the appropriate character choice for each field.
4. Press the I® key to accept each choice and move to the next character posi­
tion. When you accept a value for the last character position, you will automati­
cally return to the Status Page.
If you need to correct a mistake or change values in a character field, use the appro­
priate softkeys at the bottom of the screen. Use BKSPC to move back one character
position; CLEAR to erase all entered data; and RESTORE to restore the previous field
value. The OK softkey accepts data entry and returns the display to the previous
page, and the CANCEL softkey stops the current data entry mode.
The Status Page will now indicate the position you entered and give you a
simulated display of signal strength and satellite position. To continue the tour,
let’s move on to the Map Page.
1. Press the O key to display the Map Page.