Garmin 210 - Manual (Page 60)

SECTION AyXILIARVyEi 10
Timer & Alam Selup
Coimt Down
Elapsed Timer
Clock Marm
Anchor Alarm
Arrival Alarm
Prox Alarm
CDI Alarm
CDI Scale
CDI Steer To 00
:
10:00
00 : 00:00
00:00
o.oo;;,
o.oo;;,
o.oo:;,
to.ioi.
Center
Stop
S Run
( Stop
( Reset
dll
On
Off
UIUUUI'9
T
I Use oursor to hi 9 hli 9 ht choice, EHT to occept 2
c Til lir
Count Down
Elapsed Timer
Clock Alarm
Anchor Al(rm 00:10:00 Stop
00:00:00 Stop
00:00 Off
o.oo;;, Off
Arrival AlariBBIBS
Prox Alarm
p pm,
CDI Alarm 0 i 0 [OJ »
CDI Scale ,.J IJ'LJf »-IJIJIM
CDI Steer TglltilanBilUaillEBaiB^l
Ziwf B 1 2 3 4 5 6 7 8 9
TS
]
[UsieciJrsoiM^^
L5iS££piit L£!SSL3 OK II Cancel I
50
The timer/alarm/CDI setup submenu is used to control the GPSMAP’s
various alarm and timer settings and select course deviation scale (CDI)
preferences.
Count Down timer controls an alarm to sound when an entered interval
(up to 99:59:59) has expired. Enter a time interval in the time field and use
the control field to the immediate right to run, stop or reset the timer.
Elapsed Timer provides a running clock to 99:59:59. To run, stop or reset
the elapsed time clock, highlight the control field to the right of the timer
display, select the appropriate option.
Clock Alarm provides an alarm for the system clock. Enter a time in the
time field and turn the alarm on and off from the control field menu.
Remember to enter alarm times in the same time format (UTC or local)
you’re using for your system.
Anchor Alarm lets you specify an alarm to sound when you’ve exceeded a
specified drift distance. Enter a distance up to 9.9 miles or kilometers in the
distance field and use the control field to turn the alarm on and off.
Arrival Alarm lets you specify an alarm to sound when you’re a specified
distance away from a destination waypoint. Enter a distance radius for
sounding the alarm and use the control field to turn the alarm on and off. If
the arrival alarm is turned off, the alarm will still sound one minute before
reaching the destination waypoint at your current speed and course.
Prox Alarm lets you select an alarm to sound when you’re a specified dis­
tance from a proximity waypoint. Use the control field to turn the alarm on
and off. Proximity waypoints and radius values are entered from the prox­
imity waypoint list submenu (see page 54).